- русский
- Eng
- MAGNET BOOT
- YOKE
- 37 OZ LOWER STACKED MAGNET
- 37 OZ UPPER STACKED MAGNET
- TOP PLATE
- INPUT TERMINALS
- STAMPED STEEL BASKET
- 4-LAYER COPPER VOICE COIL WIRE
- ALUMINUM VOICE COIL FORMER
- SPIDER NECK HOLDER
- META-ARAMID FIBER SPIDER
- ARAMID FIBER INTERLACED IMPP CONE
- ABS CENTER CAP
- BUTYL RUBBER SURROUND
- GASKET
D SUBWOOFER FORCEFUL, DEEP, DEFINED
Too much isn’t enough, embrace the bass. The D subwoofer is a culmination of Pioneer technologies that produce thick, deep, powerful and accurate bass that makes listening to your favorite music energetic, fun and engaging.
Combining bass quality and bass quantity with high power handling and installation flexibility that provides high performance in both acoustic suspension (sealed), and bass reflex (ported) enclosures, the D subwoofer is the ultimate all-around performer.
Slam, attack, power. Don’t just listen to your music, feel it.
TS-D10D4
10" Dual Voice Coil 4 ohm Subwoofer
TS-D10D2
10" Dual Voice Coil 2 ohm Component Subwoofer
TS-D10LS4
10" Shallow 4 ohm Component Subwoofer
TS-D10LS2
10" Shallow 2 ohm Component Subwoofer
TS-D10LB
10" Sealed Enclosure Type 2 ohm Subwoofer
TS-D12D4
30cm (12") 4Ω Dual Coil D-Series Component Subwoofers
TS-D12D2
30cm (12") 2Ω Dual Coil D-Series Component Subwoofers
BUTYL RUBBER SURROUND
Made of a specially blended, highly durable and moisture-resistant compound, butyl rubber keeps the cone moving in a linear direction, seals the cone to the basket and quickly dampens cone vibration once the signal has changed or stopped. This results in less distortion and superior frequency response.
ARAMID FIBER INTERLACED INJECTION MOLDED POLYPROPYLENE (IMPP)
Polypropylene (PP) is a tough thermoplastic resin that is an ideal material for a subwoofer cone – with low mass and high damping, PP cones offer good sensitivity and low distortion. However, polypropylene cones lack the rigidity and strength required for high output and extreme low bass. To resolve this, Pioneer engineers using advanced Computer-Aided Manufacturing, developed a process to blend aramid fibers into the polypropylene resin during the injection molding process. The resulting Aramid Fiber Interlaced IMPP subwoofer cone is incredibly strong and low mass with high rigidity and superior strength to produce deep, powerful and undistorted bass.
LARGE DIAMETER VOICE COIL AND DOUBLE STACKED MAGNETS
A subwoofer motor structure consists of the voice coil and magnet assembly. Increasing the diameter and length of the voice coil provides greater control of the woofer cone and higher power handling. However, to take full advantage the magnet must also be increased, both in magnetic power and physical size. The D subwoofer uses an oversized 4-layer voice coil and high energy double stacked magnets to increase the overall power handling and SPL output with no sacrifice in sound quality.
عام
TS-D10D4 | TS-D10D2 | TS-D10LS4 | TS-D10LS2 | TS-D10LB | TS-D12D4 | TS-D12D2 | |
| الحجم | 25 cm ( 10" ) | 25 cm ( 10" ) | 25 cm ( 10" ) | 25 cm ( 10" ) | 25 cm ( 10" ) | 30 cm ( 12" ) | 30 cm ( 12" ) |
| قدرة معالجة الطاقة الذروية القصوى | 1,500 W | (English) 1,500 W | (English) 1,300 W | (English) 1,300 W | 1,300 W | (English) 2,000 W | 2,000 W |
| الحساسية | (English) 500 W | (English) 500 W | (English) 350 W | (English) 350 W | (English) 350 W | (English) 600 W | (English) 2,000 W |
| الاستجابة للتردد | 20Hz to 4.7kHz | 20 Hz to 6,600 Hz | 20Hz to 4.7kHz | 20Hz to 4.7kHz | 20 Hz to 3,400 Hz | 20Hz to 4.7kHz | 20Hz to 4.7kHz |
| الحساسية (داخل السيارة/1 واط) | 78dB | 74 dB | 78dB | 78dB | 74 dB | 78dB | 76dB |
| المقاومة | 4 Ω x 2 | Dual 2 Ω | 4 Ω x 2 | 4 Ω x 2 | 2 Ω | 4 Ω x 2 | 2 Ω x 2 |
| الحاوية الموصى بها | 22.6 to 43.0 liters | 22.6 to 43.0 liters | 22.6 to 43.0 liters | 22.6 to 43.0 liters | - | 22.6 to 43.0 liters | 22.6 to 43.0 liters |
| عمق التركيب | 157 mm | 157 mm | 157 mm | 157 mm | - | 157 mm | 6.2” 157 mm |
| أبعاد قاطع التيار | ø281 mm | ø281 mm | ø281 mm | ø281 mm | - | ø281 mm | ø281 mm |