- русский
- Eng
- INSTALLATION BRACKET
- BASKET WITH CHAMBER
- ACOUSTIC DAMPING MATERIAL
- POT TYPE YOKE
- 6.4 G NEODYMIUM MAGNET
- 20MM POLE PIECE
- ACOUSTIC DAMPING MATERIAL
- COPPER VOICE COIL WIRE
- POLYIMIDE (PI) VOICE COIL FORMER
- POLYESTER TEXTILE SURROUND
- 29MM ALUMINUM DOME DIAPHRAGM
- DIAPHRAGM HOLDER
- MESH GRILLE
- SWIVEL INSTALLATION BEZEL
- MOUNTING FLANGE
- INSTALLATION BRACKET
- BASKET WITH CHAMBER
- ACOUSTIC DAMPING MATERIAL
- POT TYPE YOKE
- 6.4 G NEODYMIUM MAGNET
- 20MM POLE PIECE
- ACOUSTIC DAMPING MATERIAL
- COPPER VOICE COIL WIRE
- POLYIMIDE (PI) VOICE COIL FORMER
- POLYESTER TEXTILE SURROUND
- 29MM ALUMINUM DOME DIAPHRAGM
- DIAPHRAGM HOLDER
- MESH GRILLE
- SWIVEL INSTALLATION BEZEL
- MOUNTING FLANGE
Z SUBWOOFER NO COMPROMISES
The Z subwoofer is based on the same highly advanced technology as the Z full range loudspeakers to create seamlessly integrated musical perfection – fast, detailed and extended bass with tremendous impact and clarity.
Combining high fidelity and high output in a compact, shallow design, the Z subwoofer offers both unlimited performance and unlimited installation flexibility. As a result, the placement of the Z subwoofer can be optimized for sound quality and bass reinforcement, unlike conventional subwoofers that must be installed simply where they physically fit.
Balance, speed, power and bass extension – the ultimate combination for low-frequency nirvana.
TS-Z10LS4
10" Shallow 4 ohm Component Subwoofer
TS-Z10LS2
25 cm (10") Z-Series Component Subwoofer
DESIGNED FOR HI-RES AUDIO
Even in the sub-bass region, Hi-Res Audio recordings contain significantly more data compared to a standard CD recording and require a subwoofer that is capable of extremely high dynamic range and low distortion that integrates smoothly with the the mid- and high-frequency speakers. The Z subwoofers are designed to take full advantage of Hi-Res Audio recordings, with wide dynamics, extended frequency response and extraordinarily accurate and detailed bass.
SHALLOW BASKET WITH OVERSIZED CONE AND MAGNET
A subwoofer requires an extremely strong basket that holds the cone, suspension and motor structure together in perfect alignment even during high excursions at low frequencies. Traditional subwoofers require large enclosures that can be challenging to install seamlessly. The Z subwoofer features a shallow basket for installation flexibility, a low Q design for high performance in small enclosures, an oversized cone (115% when compared to a conventional 10” subwoofer) and a motor structure with a powerful 67.7 oz magnet that combine to produce fast, detailed and extended bass with tremendous impact and clarity.
TWARON SUBWOOFER CONE CONSTRUCTION
Twaron is a synthetic aramid fiber that is very strong, heat resistant and rigid when woven into a cloth material. Subwoofer cones created with Twaron are rigid and low mass with excellent damping characteristics. Strength and rigidity are important to maintain cone shape during challenging bass notes, while damping is critical to improving the responsiveness and signal accuracy. The low mass of an aramid fiber cone improves both sensitivity and the speed of the Z subwoofer, increasing output and power handling.
عام
TS-Z10LS4 | TS-Z10LS2 | |
| الحجم | 25 cm ( 10" ) | 25 cm ( 10" ) |
| قدرة معالجة الطاقة الذروية القصوى | 1,300 W | 1,300 W |
| الحساسية | 400 W | 400 W |
| الاستجابة للتردد | 20Hz to 3800 Hz | 20 Hz to 3,800Hz |
| الحساسية (داخل السيارة/1 واط) | 81 dB | 80 dB |
| المقاومة | Single 4Ω | Single 2Ω |
| الحاوية الموصى بها | 9.9 liters to 19.8 liters | 9.9 liters to 19.8 liters |
| عمق التركيب | 81 mm3.2” | 81 mm3.2” |
| أبعاد قاطع التيار | ø231 mm | ø231 mm |